Top 4 Most Common Floor Buffer Problems
设备突破时，它会导致设备停机。如果没有明白清洁设备，您的清洁清洁团队将不得不花更多时间完成每项任务，导致较低的工人生产力和更高的劳动力成本。
Knowing the problem affecting yourcommercial floor buffercan help you better understand whether your buffer requires professional repair or if it is a simple fix.
Some of the most common causes of broken equipment can be fixed by you. Not having to bring your buffer in for service for something that could have been easily fixed will save you time and money, and allow your cleaning team to get back on track faster.
Read on to learn more about the 4 most common problems with commercial floor buffers:
- Floor Buffer Not Turning On
- Floor Buffer Won’t Stay On
- 地板缓冲器振动超过正常情况
- Floor Buffer is Dulling and Scratching the Floor
问题1：楼层缓冲器未启动
可能的原因：未插入
If your floor buffer will not turn on, check to see that the buffer is plugged into the wall outlet. The plug may have fallen out or have been placed in a faulty outlet.
修复：Double-check that the issue is not originating from the wall outlet rather than the floor buffer. Test the outlet by plugging in a second device to check for power. If the second device does not receive power, the wall outlet is not working. If the second device does receive power, the problem is not with the wall outlet.
Possible Cause: Damaged Or Frayed Power Cords
Damaged or frayed power cords may be preventing the machine from getting any power.
电源线通常损坏储存和使用不当。
Cords should be stored according to the manufacturer's specifications. Most machines will have a cord hook to wrap the cord around.Do not leave the cord unwrapped in storage.
在使用时，操作员必须仔细绕线操纵，以便缓冲区不在电线上运行。Cords which are run over become damaged and pose a safety risk to the user.To avoid running over the cord, the operator should start the machine closest to the outlet they are using as a power source and then work away from the plug.
Ripping the power cord from the outlet will cause the prongs to become bent and can cause the plug to separate from the cord.你的电线应该有3个叉子。
修复：Check the power cord for bent prongs, missing prongs, or frayed areas. If there is damage to the protective covering of the cord or prongs, the power cord will need to be replaced. The cord should be replaced by a certified technician.
机器服务和维护只应由认证技术人员执行。
Problem 2: My Floor Buffer Won’t Stay On
Possible Cause: Floor Buffer Trips Wall Circuit
A tripped wall circuit breaker is caused by a temporary overload on the circuit or a short in the device plugged into the electrical outlet.
当绘制太多的电源或过多的应变时，电路跳闸。如果电机吸引高电平，则电路断路器将停止提供电力。
修复：测试查看插座是否为另一个设备提供电源。如果有第二个设备的电源，则问题不具有插座。缓冲断路器可能已经跳闸。
Possible Cause: Floor Buffer Trips Machine Circuit
机器上的断路器用于保护电机在缓冲区上。
The most common reason the buffer circuit trips is that some of the floor buffer’s cord is still wrapped around the cord hook.您永远不应该使用仍然缠绕在绳索挂钩的电线中的地板缓冲区。当缠绕电线钩时，电源线不会收到足够的电源，并将导致机器上的应变，最终跳闸电路。
修复：如果绳索仍然缠绕在绳索挂钩周围，请释放电线并重置缓冲断路器。
The more a floor buffer’s circuit trips, the weaker the circuit will become, causing it to trip more frequently.
专家提示：If you are not sure if the electrical circuit or the buffer circuit has tripped, start by checking the wall circuit. Plug a second device into the electrical outlet to see if it will provide power to the second device. If the second device does not power on, reset the electrical outlet. If the wall outlet does power the device, check the machine circuit breaker.
问题3：楼层缓冲器振动超过正常
Possible Cause: Floor Pad Is Installed Incorrectly
The floor padmust be centered在the machine. If the pad is not centered on the pad driver, it will not be balanced and will cause the machine to shake or vibrate on the floor.
修复：Removing and reinstalling the pad should fix the problem.
可能的原因：地板垫损坏或磨损
损坏或磨损地板垫不会坐均匀the floor and can cause the pad driver to wobble while it is rotating.
修复：R涂层和更换地板应解决问题。
可能的原因：电机问题
如果问题不与地板焊盘没有，则该问题可能位于电机内。
修复：Motor related issues are typically more difficult to fix. Consult an authorized service technician.
机器服务和维护只应由认证技术人员执行。
专家提示：保修的缓冲区可能要求计算机维护和服务仅由经过认证技术人员执行，或者保修将无效。在对缓冲区执行任何服务或维护之前，请咨询您的制造商。
Problem 4: Floor Buffer Is Dulling Or Leaving Scratches On The Floor
如果您的地板缓冲区是钝化或刮擦地板，您的地板缓冲可能不会破坏。
Possible Cause: Wrong Floor Pad
选择缓冲区的楼层焊盘时，您将想要选择最不攻击的底板，以最佳地执行维护程序。通常，较暗的地板垫，垫的侵蚀性或磨料更具侵蚀性或磨料。垫的面孔越咄咄逼人，越突破即将删除。使用对您的终点过于攻击的垫将导致条纹并划伤到您的地板上。
修复：为确保您使用的右层垫进行清洁程序和楼层饰面，请查看我们的文章和视频：What Is The Best Floor Pad For Your Buffer Or Burnisher? [Video]
Final Thoughts
Floor buffers are an important part of your hard floor care program and when your floor buffer isn’t working properly, it is costing you time and money.
许多次你的地板缓冲器问题的原因可以通过你解决，但如果它是一个更复杂的问题，EBP和其他帝国戴德地点都有培训，帮助保持您的设备在高峰状况下运行。爱游戏旧版下载安装
Our trained technicians can prevent surprise breakdowns and make sure your equipment is functioning as it should. If you're located in the United States, Puerto Rico, or the Caribbean, we can provide you with top-rated service for your equipment.
访问我们的网站要了解有关我们的设备服务和维修计划的更多信息，或者今天安排咨询。
Some other articles about floor buffers you might be interested in include:
