Dan Carr

By:Dan CarrApril 9th, 2019

Print/Save as PDF

地板缓冲区和折叠器有什么区别?[视频]

Buffing and burnishing are two periodic procedures for cleaning and maintaining your facility's hard floors. When used properly, both buffing and burnishing will help keep your hard floors looking great while making the job easier, taking less time, and saving money on labor.

缓冲剂和耐砂是一样的吗?

Buffers and burnishers are not the same piece of janitorial cleaning equipment.

Buffers and burnishers perform different tasks, and it is important to use the proper machine for the right job. Using the wrong machine to perform a selected cleaning procedure can cause damage to your floor and equipment.

What is the Difference Between a Buffer and a Burnisher?

The differences between a buffer and a burnisher are the speed, motion, and floor maintenance procedures they complete.

BUFFERS: BURNISHERS:
Arelowspeed Arehighspeed
Operate in aside-to-side运动 Drivestraight
曾经strip,干净的,buff, orscruba floor 曾经polish(burnish)a floor

How Do I Know if I Need a Buffer or a Burnisher?

The key to choosing the right machine is understanding what task you are trying to complete.

Are you trying to strip the floor? Then you’re going to be looking for a buffer.

Are you looking for the best and most efficient way to restore a floor’s shine? Then you’re looking for a burnisher.

What is a Floor Buffer?

Afloor bufferis a piece of industrial cleaning equipment that allows cleaning professionals tostrip or removethe wax from a facility’s floor.

Nilfisk-Advance Clarke CFP Pro® 20DS Floor MachineBuffers are commonly referred to as strippers, swing machines, or side-to-side machines.

Depending on the floor pad applied to the machine, buffers can also be used tobuff, clean, or scrubyour facility's floor to remove dirt and scuff marks, restoring its original shine.

Buffers operate at low speeds of 175 - 300 RPM to perform a particular cleaning procedure.

A buffer rests directly on the pad, creating 100% contact between the floor and the pad. The machine does not rest on the hind wheels and the wheels should only be used for transport.

To maneuver, the operator is in full control as it moves side-to-side, hence the nickname “side-to-side” machine.

Read More:2022年最佳商业地板缓冲区

Types of Buffers

缓冲区可以取决于其具有的变速箱和马力电动机的类型。

Power Source

所有缓冲区都是基本的绳索电模型。绳索缓冲区被插入设施的电源插座以操作。随着清洁路径的进行,需要移动电源线并重新插入。

Electric cords are typically 50 to 75 feet long.

Gearbox

The gearbox provides power and stability to rotate the floor pad in a balanced motion.

Gearboxes are available in three different types: single, double, and triple planetary.

Single and Double planetary gearboxes不要完全平衡整个PAD驱动程序的功率。

Triple planetary gearboxesprovide the best torque and balance control.

Motor

Motors can range from .5 - 1.5 horsepower.

The higher the horsepower, the more power the machine will have to rotate the floor pad.

Most buffers have a 1.5 hp motor.

Motor size will depend on the machine size and facility budget.

大小

Buffers typically offer cleaning paths between 13 inches and 20 inches.

The most common size buffer is 20 inches.

The size you will need will depend on your facility type, size, and budget.

Download your Ultimate Guide to Floor Buffers Today

What is a Floor Burnisher?

Afloor burnisheris a piece of power equipment used topolish or burnisha floor to bring out its original shine.

Clarke Ultra Speed Burnisher with Dust ControlBurnishers operate at high speeds, 1000 - 3000 RPM, to achieve a high gloss shine within a few passes, rather than multiple passes with a buffer.

Burnishers rest on the wheels of the machine, driving the machine straight.

On most machines about 50% of the pad to touches the floor, but some advanced models offer better pad-to-floor contact.

Pro Tip:The success of each machine is dependent on selecting the right floor pad.

Read More:What is the Best Floor Pad for your Buffer or Burnisher?

Types of Burnishers

Burnishers are available in traditional, entry-level (basic) models or advanced models.

Each type of burnisher can achieve different results depending on power and pressure output. Machine power and pressure are reliant on the power source.

Download your Ultimate Guide to Floor Burnishers Now

Basic Burnishers

Basic Features

大小

The most common size cleaning path for a basic burnisher is 20 inches.

Power Source

Basic model burnishers are cord-electric.

绳索电

The cord-electric burnisher is the most commonly purchased because of its low cost.

Cord-electric burnishers produce theleast amount of downward pressureYellow Cordwhen compared to battery or propane powered machines because of the restricted power output allowed from a facility’s electrical outlets.

Electric cords are typically 50 to 75 feet long.

While the electric model is the lowest cost, having to stop, move the cord, and plug into another outlet can lead to decreased productivity.

Advanced Burnishers

Advanced Features

Advanced models are more expensive, but offer additional features like automatic height adjustment, dust control, and noise control.

大小

Advanced burnishers offer a larger range of cleaning paths from 12 to 35 inches.

自动高度调节/垫压力

When selecting a burnisher, keep in mind how the machine operates. Traditional burnishers will require you to manually adjust the pad to produce the correct amount of pressure on the floor. Machines that require manual adjustments allow for operator error, increased mistakes, and damage to your floor.

Pro Tip:更多的垫压力并不意味着更多的光泽。调整垫压力以产生更大的向下压力不是最佳实践。它可能会损坏设施的地板并缩短机器的使用寿命。

When possible, select a burnisher which has gas shocks that automatically adjust and balance the pad pressure of the machine to your floor.

Dust Control

Dust Control尘埃控制有助于去除在抛光过程中产生的灰尘颗粒,以改善室内空气质量并减少对后续灰尘擦拭的需求。

Dust control machines are considered more environmentally friendly because they remove dust from the floor and draw it into an internal bag where the dust is contained. If you are using your dust control burnisher for daily maintenance, the dust control bag should be changed at least once a week.

Noise Control

Machines with low decibel output can be used for maintenance during regular business hours without disturbing occupants.

Power Source

More advanced burnishers are typically propane or battery powered. Some cord-electric models may offersomeadvanced features.

Propane and battery operated burnishers can increase productivityup to 30%when compared to cord-electric burnishers.

Battery-Powered

Battery powered burnishers offer increased portability, power, and productivity as a result of their cordless design.

Battery-powered burnishers can bewalk-behind or ride-on.

步行

Battery operated walk-behind burnishers are operated the same way electric or propane machines would be.

Ride-On

Ride-on burnishers perform the same tasks as traditional burnishers but allow the operator to sit on the machine and maneuver the machine with hand controls. They are practical for areas larger than 2,000 square feet where smaller burnishers would be inefficient.

Battery powered machines have a limited charge before they run out of power, so ensure that the machine is fully charged and able to accommodate the size area you are maintaining.

On a single charge, battery operated machines run for anaverage of 3 hoursbut vary by model and manufacturer.

Propane

Propane operated burnishers offer thegreatest speeds and power.

To operate, they often require a plug-in starter or battery to start the motor.

Propane machines operate using an internal combustion motor which can pose safety concerns.

The propane motors can release toxic emissions and produce an unpleasant odor which can be harmful to occupants. Propane operated burnishers should only be used in well-ventilated areas.

Propane is extremely flammable and should be used with caution to avoid a fire hazard.

On average, a 20-pound or 5-gallon tank will operate for about 18-22 hours.


Final Thoughts

Addingcommercial floor buffers and burnishers到你的维护程序将有助于减少蜡烛aning times and lower labor costs.

If you’re located in the United States, Puerto Rico, or the Caribbean, EBP and other Imperial Dade locations can match you with the best floor maintenance equipment to meet your facility's needs, budget, and demands.

Contact an EBP Specialisttoday for a comprehensive review of your floor maintenance program. Our Specialists can help you identify the best floor machine to keep your floors looking their best.

Download your Ultimate Guide to Floor Buffers Today

Check Out These Additional Resources:

About Dan Carr

Dan Carr is the Equipment Program Manager for EBP Supply Solutions and a Trainer for the EBP Training Academy, which offers CMI-certified and other training courses for supervisory and front-line cleaning professionals throughout the Northeast and Mid-Atlantic regions of the United States. He holds the ISSA CMI Basic certification and has over 35 years of experience in the janitorial and sanitation industry.

Baidu